Blogs

The First cold chain quick-freezing machine Introduction: Quick-freezer machine is a fast freeze equipment, the product in a relatively short period of time by -35℃ even more lower temperature make the product center temperature reaches -18℃, (3cm thick below the frozen product (excluding packaging)

Precautions for the use and maintenance of quick-freezing cold storage: 1. Prevent the freezing and thawing cycle, freezing and freezing of the building structure. 2. Protect the floor from frost and damage. 3. In the use of quick-freezing warehouses, the freezing and refrigerating capacity should be brought into full play in accordance with the design requirements, ensuring safe production and product quality, and maintaining the cold-storage building structure. The warehouse should set up a special team to manage, and the responsibility should be implemented by everyone, every warehouse door, every piece of equipment and tools.

Attentions for the installation of quick-freezing cold storage: 1. The foundation of the quick-freezing cold storage is affected by low temperature, and the moisture in the soil is easily frozen. Due to the volume expansion of the soil after freezing, it will cause ground rupture and deformation of the entire building structure, which will seriously make the cold storage unusable. For this reason, in addition to an effective heat insulation layer, the floor of the quick freezing cold storage must be treated under the heat insulation layer to prevent the soil from freezing.

Calculation of effective storage volume in cold storage 1. Calculation of tonnage in cold storage: 1. Assembled light steel structure cold storage: Tonnage of assembled light steel structure cold storage = content of refrigerated room × volume utilization factor × unit weight of food Internal volume of cold storage room of prefabricated light-steel structure cold storage = (inside the storehouse) length × width × height (cubic): volume utilization factor (stacking) of prefabricated light-steel structure cold storage: 500 ～ 1000 cubic meters = 0.40; Cubic = 0.50; 2001 ～ 10000 cubic meters = 0.55; 10001 ～ 15000 cubic meters = 0.60: